H-bridge design on a 5x5cm PCB. Available for sale in the component selection as a solderable kit.
The H-bridge can be used to control speed and direction for one motor, or only speed for two motors.
Documentation (git)
https://git.omegav.no/ov/h-bridge
Pinoout
| Pin | Explanation | |
|---|---|---|
VCC | Supply voltage for control logic | 5V |
GND | Ground for control logic | |
| A | Control input for A side of motor | max 5V |
| B | Control input for B side of motor | max 5V |
| M_A | Output motor A | |
| M_B | Output motor B | |
| VCC_M | Supply voltage for motor | |
| GD_M | Ground for motor supply |
Components
| Component | Max current | Max voltage |
|---|---|---|
| 1N4007 | 1A | 1000V |