https://git.omegav.no/steinned/ov-imponator-addressable
Kopiert fra readme på git:
OV-imponator!
The hardware is designed using KiCad, and the project borrows a little layout from a previous attempt at an OV-imponator with another architecture (used "dumb" LEDs).
The imponator will consist of a circuit board shaped like the OV logo, with a regular imponator pin on the back, and a laser cut diffuser on top of the SK9822 addressable RGB LEDs. It will be connected to an external battery pack. Unlike the regular imponators, the diode plate and "driver circuit" are combined in this implementation.
Symbols and footprints not contained in the official KiCad (7.x) library should be added to the respective project-local libraries.
Diffuser
Diffuseren er ikke ennå på githuben. På confluence har vi en grafisk profilmanual, der ligger det en fil for laserkutting og sånt. Den må skaleres til laserkutteren, bruk skyvelære. Graver en firkant på baksiden av akrylen, graver forsiden i formen av OV-logo, kutt ut OV-logoen. Jeg brukte smeltelim inn mellom kretskortet og diffuseren på noen punkter, gjerne finn en bedre måte å feste den på.
Komponentene koster veldig omtrentlig 100kr, og kretskortet er tolags på ca. 50 x 65 mm.
I starten har jeg (Steinar) tenkt å bestille opp 5 eller 10 kretskort (ca 250kr med hurtigfrakt) og nok komponenter til 2 imponatorer (ca 200kr).
BOM:
Source: | D:\Downloads\ov-imponator-addressable\Hardware\OV-imponator.kicad_sch |
Date: | 28/01/2024 23:11:54 |
Tool: | Eeschema 7.0.6 |
Generator: | D:\7.0\bin\scripting\plugins/bom_csv_grouped_by_value.py |
Component Count: | 61 |
Item | Qty | Reference(s) | Value | LibPart | Footprint | Datasheet | Order code | Vendor |
1 | 25 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C26, C28 | 100nF | Device:C_Small | Capacitor_SMD:C_0603_1608Metric | ~ | OV | |
2 | 2 | C24, C25 | 4.7µF | Device:C_Small | Capacitor_SMD:C_0603_1608Metric | ~ | OV | |
3 | 1 | C27 | 150µF, 10V | Device:C_Polarized | Capacitor_SMD:CP_Elec_6.3x5.4 | https://www.we-online.com/components/products/datasheet/865080243008.pdf | 2466266 | Farnell |
4 | 22 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 | SK9822 | Imponator-local-symbols:SK9822 | Vimponator-local-footprints:LED_RGB_5050-6_less_silkscreen | https://www.pololu.com/file/0J1234/sk9822_datasheet.pdf | OV/LCSC | |
5 | 1 | D23 | TEMD6200FX01 | Device:D_Photo | Diode_SMD:D_0805_2012Metric | https://www.farnell.com/datasheets/2711856.pdf | 2251282 | Farnell |
6 | 1 | H1 | Imponator needle | Mechanical:MountingHole_Pad | Vimponator-local-footprints:Imponatornål_20mm | ~ | OV/cchobby | |
7 | 1 | J1 | AVR-UPDI-6 | Connector:AVR-UPDI-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | https://www.microchip.com/webdoc/GUID-9D10622A-5C16-4405-B092-1BDD437B4976/index.html?GUID-9B349315-2842-4189-B88C-49F4E1055D7F | OV | |
8 | 1 | J2 | JST XH | Connector_Generic:Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | ~ | OV | |
9 | 1 | R1 | 1M ohm | Device:R_Small | Resistor_SMD:R_0603_1608Metric | ~ | OV | |
10 | 2 | R2, R3 | 100? | Device:R_Small | Resistor_SMD:R_0603_1608Metric | ~ | OV | |
11 | 1 | R6 | 1.5M | Device:R_Small | Resistor_SMD:R_0603_1608Metric | ~ | OV | |
12 | 2 | SW1, SW2 | KSS321G LFS | Switch:SW_Push | Vimponator-local-footprints:KSS side-actuated switch | ~ | 1437642 | Farnell |
13 | 1 | U1 | AVR64DD14-I/SL | Imponator-local-symbols:AVR64DD14-I/SL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/AVR64DD-14-20-Prelim-DataSheet-DS40002444.pdf | 4077889 | Farnell |