Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
  • Don't mix plating materials on connector contacts, as this increases likelihood of corrosion. For instance, gold plated-to-gold plated is fine, tin-to-tin is fine. Gold-to-tin is bad.
  • When designing PCBs, use a ground plane by default. This has many practical benefits, but also big benefits with regards to signal integrity. If you are going to design a high frequency systems, grounding strategy is a huge rabbit hole that you should read up on.
  • Need your electronics to be exposed to the weather? Look into this stuff:
    • Conformal coating (if you can't put electronics in a sealed box)
    • IP rated connectors
    • Connector lubricant/grease