...
Materiale | Tykkelse | Speed | Power % | Kommentar | Advarsler | Example Pictures |
---|---|---|---|---|---|---|
Flyfinér | 2.2mm | 28 | 33 | Kutt | ||
Kryssfinér | 4mm | 30 | 40 | Kutt | ||
Kryssfinér | 6mm | 20 | 40 | Kutt | ||
Kryssfinér | 12mm | 6 | 60 | Kutt | ||
Kryssfinér | N/A | 300 | 15 | Gravering+Dithering(20 dps) | IMG_20181218_142608.jpg | |
Kryssfinér | N/A | 300 | 15 | Gravering, no dither | ||
Kryssfinér | N/A | 400 | 12 | Gravering, no dither | 12p_400mmps_0.1mm_nodither.jpg | |
Kryssfinér | N/A | 200 | 15 | Gravering, no dither | ||
Kryssfinér | N/A | 600 | 12 | Gravering, Dither 100, interval 0.1, contrast 3.2%. 1200x800mm, tok 5 timer | Bør tenke over kolreis å feste ei så stor plate på forhånd. | IMG_20190202_153650.jpg |
MDF | 6mm | 28 | 28 | Kutt | ||
MDF | 6mm | 250 | 20 | Gravering | ||
Papp | 2MM | 25 | 25 | Kutt | ||
Papp | 2mm | 320 | 15 | Gravering | ||
Glass | 2 mm | 300 | 30 | Gravering, dither 50 dpi, speilvent gravert på baksiden, invertert farge | IMG_20181225_142955754.jpg | |
Glass | vinflaske | 300 | 30 | Gravering, no dither | ||
Bambus | 20mm | 300 | 15 | Gravering, no dither | IMG_2829.JPG | |
Plastglass biltema Presset Styren-akrylnitril | 4mm | 10 | 40 | Kutt. Litt røffe kanter på baksida, smelta litt for mykje. | ||
Pizzaeske | 0.9mm | 35 | 15 | Kutt | ||
Pizzaeske | 0.9mm | 300 | 10 | "Gravering" | ||
Kork | ? | ? | ? | (UTESTET) Kan visstnok kuttes bra | ||
Plexiglas®/Akryl/Lucite/PMMA | 5mm | 10 | 30 | Fungerte supert, litt lukt siver inn på OV, veldig lite lukt på smia. | Pass på at det faktisk er akryl | |
Plexiglas®/Akryl/Lucite/PMMA | 3mm | 12 | 30 | Fungerte ganske bra. Litt for seint eller litt for mye power. | ||
Delrin (POM) | ? | ? | ? | (UTESTET) Delrin comes in a number of shore strengths (hardness) and the harder Delrin tends to work better. Great for gears! | ||
Kapton tape (Polymide) | 3mm? | ? | ? | (UTESTET) Works well, in thin sheets and strips like tape. | ||
Mylar | 3mm? | ? | ? | (UTESTET) Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl | Gold coated mylar will not work. | |
Solid Styrene | 3mm? | ? | ? | (UTESTET) Smokes a lot when cut, but can be cut. | ||
Depron foam | 10mm? | ? | ? | (UTESTET) Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. | Must be constantly monitored. | |
Gator foam | ? | ? | ? | (UTESTET) Foam core gets burned and eaten away compared to the top and bottom hard paper shell. | Not a fantastic thing to cut, but it can be cut if watched. | |
Cloth/felt/hemp/cotton | ? | ? | ? | (UTESTET) Kan visstnok kuttes bra. Kan lage blonder? | Not plastic coated or impregnated cloth! | |
Leather/Suede | 6mm? | ? | ? | (UTESTET) Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8"). | Real leather only! Not 'pleather' or other imitations! | |
Magnetic sheet | ? | ? | ? | (UTESTET) Kan visstnok kuttes veldig bra | ||
Gummi UTEN KLORIN | ? | ? | ? | (UTESTET) Skal gå fint å kutte | Vær sikker på at det ikke inneholder klorin! | |
Teflon (PTFE) | ? | ? | ? | (UTESTET) Cuts OK in thin sheets | ||
Carbon fiber mats/weave that has not had epoxy applied | ? | ? | ? | (UTESTET) Can be cut, very slowly. | You must not cut carbon fiber that has been coated!! | |
Coroplast ('corrugated plastic') | 10mm? | ? | ? | (UTESTET) Difficult because of the vertical strips. Three passes at 80% power, 7% speed, and it will be slightly connected still at the bottom from the vertical strips. | ||
Keramiske fliser | N/A | ? | ? | (UTESTET) Gravering | ||
Anodisert aluminium | 1.5mm? | 10 | 30 | Gravering. Produces a white, resistant, light diffusing layer. | ||
Malt metall | 1mm? | 300 | 15 | Gravering. Vaporizes the paint away. Remember to INVERT you image. | ||
Stone, Marble, Granite, Soapstone, Onyx. | N/A | ? | ? | (UTESTET) Gravering. Gets a white "textured" look when etched. High power pls. |
...