...
Dette utstyret er farlig, og du kan potensielt skade deg alvorlig hvis du bruker det feil! Les sikkerhetsinstruksen nøye, og spør et Noechelmedlem om du er usikker.
Slipemaskinen på Mech er en bordslipemaskin med to slipesteiner, en grov og en fin.
(bilde)
| Warning |
|---|
| Må ikke brukes til aluminium! Aluminium er mykt og tetter porene i slipesteinen, og den blir ubrukelig. Bruk annet slipeverktøy til dette. |
Sikkerhetsinstruks
Verneutstyr
- Påbudt verneutstyr
- Øyebeskyttelse (briller eller maske)
- Anbefalt verneutstyr
- Hansker
Sikker bruk
...
| ||
| Use protective eyewear! Please read the instructions carefully! |
| Note |
|---|
Please do not use the bench grinder for aluminum, as this will cause it to immediately need maintenance. If you absolutely have to you should do the maintenance afterwards. |
There is a bench grinder in Mech, of the model "Flott". This machine is used to grind metal, typically to remove sharp edges or to shape an object. Should not be used to remove large amounts of material.
Instructions
Protective equipment
Mandatory
- Eye protection goggles
Recommended
- Gloves
Safe usage
- Make sure that the support plate by the grindstones are adjusted correctly. The distance to the grindstone should be less than 1 mm, but make sure they are not in contact.
- Firmly hold the part that you are grinding. Unexpected pulling or twisting forces may occur.
- Do not apply excessive force to the part.
- Make sure the angle between the part and the support plate is positive. In other words, make sure that the part is pointing upwards towards the grindstone and is resting on the support plate.
Maintenance
The grindstones should be kept square to grind evenly. We have a straightening tool for this, a diamond encrusted block with a handle that can be used to grind off irregularities in the grindstone.
...